For 2016-2024 Chevy Camaro RS SS ZL1 ABS Rear Trunk Spoiler Wing Carbon Fiber

  
Chevy Camaro RS SS ZL1. Product Material:High Quality ABS Material. QC test facility to ensure good quality. Easy installed and No modification needed, double side Automotive tape at the back. This item doesn't come with manual installation. Comparison position And Clean the location of the installation with rubbing alcohol before proceeding. (make sure to remove any grease, wax or dust etc).

Please ensure that the product completely fits before proceeding with installation. Remove the high strength double-sided adhesive from the back of the plate. In the case of a relatively low temperature, heat installation location, and plate with a hair dryer or a heat gun on low setting. Carefully place the product in desired location and press down for about 1-2 minutes, Note: do not wash your car for 24-hours.

The adhesive should be cured after 12-hours. If the package contains self-tapping screws, tighten the self-tapping screws in turn. (Some Item Don't Need Hardware). Why Do We Need To Install The Rear Trunk Spoiler Wing?

Effectively reduce the air resistance generated by the vehicle at high speed, which can save fuel and improve the stability of the vehicle. For the appearance of the car to add dynamic, making the vehicle more smooth lines.

Make the car have a greater grip, so that the car can drive closely to the road and improve the stability of driving. If there is any problem with our products, pls feel free to contact with us, we will try our best to help you solve it, thanks. Please do not operate anything else.

Your account if you accumulate 4 unpaid's total. Otherwise you are not pleased, simply let me know via e-mial rather than leave low score, and I will do our best to solve any problem.

We believe that everything could be solved by communication. We will solve it for you. Sometimes have a little delay due to the weekends or holidays.